3DM2283 3 Phase Digital Stepper Drive

Qty

Price($)

1-3

135.00

4-10

133.00

11-20

130.00

Features

Step & direction or CW/CCW control
DSP-based stepper control technology
Anti resonance
Automatic motor identification and self configuration
Extra low noise
Extra smooth movement
Low drive & motor heating
Maximum frequency: 200KHz
Input voltage: 90 - 230 VAC / 115 - 325 VDC
Output current: 7 selections of 2.1 - 11.7A via DIP switches; or any value of 0.5 - 11.7A via software configuration
Micro steps: 16 selections of full - 128 step via DIP switches; or full - 512 step via software configuration
Automatic idle current reduction

Specification

Model:	3DM2283
Phase:	3
Control Mode:	Step & Direction
Max Input Frequency:	200KHz
Input Voltage Range:	90 - 230 VAC / 115 - 325 VDC
Software Cofig. Resolution Range:	200 - 102,400 (increased by 200)
# of DIP Switch Resolution Configurations:	16
DIP Switch Resolution Setings:	200, 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
Software Cofig Current Range:	0.5 - 11.70 A (increased by 0.1 A)
# of DIP Switch Current Configurations:	8
DIP Switch Current Configurations:	2.9A, 3.1A, 4.5A, 5.9A, 7.3A, 8.9A, 10.1A, 11.7A
Logic Current Range:	7-16mA (10mA typical)
Logic Voltage Range:	4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low
Communication Type:	RS232
Pulse enabled at:	Rising edge
Idle Current Percentage:	50 %
Software Config. Idle Current Percentage:	0-100%
# of Digital Inputs:	3
# of Digital Onputs:	1
Step Width:	2,500 ns
Minimal Direction Setup Time:	5,000 ns
Protection:	Over-current, over-voltage, under-voltage, phase-error, and over-temperature protection
Isolation Resistance:	500M Ohm
Environment:	Avoid dust, oil fog and corrosive gases
Ambient Temporature:	0-50°C
Humidity:	40–95% RH
Operating Temporature:	0-70°C
Vibration:	5.9 m/s2 Max
Storage Temporature:	-20-65°C
Specification:	7.87 X 5.39 X 3.19 Inches

RELATED PORDUCTS